Load Tray <X>: [Type], [Size] To use another tray, touch "Options"
Description
This message appears when the indicated tray is selected but is not loaded, and other paper trays are
available for use. It also appears when the tray is configured for a different paper type or size than the
print job requires.
Recommended action
1. Load the correct paper in the tray.
2. If prompted, confirm the size and type of paper loaded.
3. Otherwise, touch the OK button to select another tray.
Manually feed output stack Then touch "OK" to print second sides
Description
The product has printed the first side of a manual duplex job and is waiting for the user to insert the
output stack to print the second side.
Recommended action
The even-numbered pages of the two-sided document have printed. Follow the next steps to print the
odd-numbered pages.
1. Maintaining the same orientation, remove the document from the output bin. Do not discard blank
pages.
2. Flip the document over so the printed side is up.
3. Load document in Tray 1.
4. Touch the OK button to print the second side of the job.
Manually feed: [Size]
Description
This message appears when manual feed is selected, Tray 1 is not loaded.
Recommended action
Load tray with requested paper.
Manually feed: [Size] To continue, touch “OK”
Description
This message appears when manual feed is selected, Tray 1 is not loaded, and other trays are
available.
ENWW
Tools for troubleshooting
303
To Next Page
Loading...