HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
The product can be configured to stop when the supply level is very low. The supply might still be able
to produce acceptable print quality.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
◦
10.00.70 (event code): Black toner cartridge
◦
10.01.70 (event code): Cyan toner cartridge
◦
10.02.70 (event code): Magenta toner cartridge
◦
10.03.70 (event code): Yellow toner cartridge
◦
10.23.70 (event code): Fuser Kit
◦
10.31.70 (event code): Toner collection unit
◦
10.22.70 (event code): Transfer kit
Recommended action
◦
Replace the specified supply.
◦
Configure the product to continue printing by using the Manage Supplies menu.
Replace Document Feeder Kit
Description
The document feeder kit is very low.
Recommended action
Install a new document feeder roller assembly and a separation pad assembly.
Replace Fuser Kit
Description
The product indicates when the fuser kit is at its estimated end of life. The actual life remaining might be
different than the estimation. Have a replacement fuser kit available to install when print quality is no
longer acceptable.
The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.
NOTE: After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty
on that fuser kit ends.
Recommended action
Replace the fuser kit.
WARNING! The fuser can be hot while the product is in use.
ENWW
Tools for troubleshooting
313
To Next Page
Loading...