Figure 1-52 ADF path for two-sided documents
1
2
3 4 5
6
7
8
NOTE: Callouts in Figure 1-52 ADF path for two-sided documents on page 67 are identical to
callouts in
Figure 1-51 ADF path for single-sided documents on page 66 .
Stapler (stapling models only)
The product includes a stapler capable of stapling 20 sheets of (75 g/m
2
) (20 lb) paper. The stapler is
powered by a +24v connection from the DC controller. Because there are no logic connections to the
product, error conditions or out-of-staples indications are not displayed on the control panel.
ENWW
Scanning/image capture system
67
To Next Page
Loading...