HP LaserJet Enterprise 600 - Energy Settings and Sleep Timer; Enable Sleep;Auto Off Timer; Sleep;Auto Off After; Wake;Auto On Events

5

EnergySettings–SleepTimer
TheSleepTimeristhecorecontrolfortheprinter’senergysavings.ItcanbefoundontheEnergy
Settingspage,

EnergySettingsPage
andiscomprisedofthreecontrols:
A) TheEnableSleep/AutoOffTimerche ck boxallowstheprintertoautomaticallyenterSleepor
Auto‐Offafteraperiodofinactivity.
B) ThecontentsoftheSleep/AutoOffAftertextboxspecifieshowlongtheprinterwaits,in
minutes,afteranyactivitybeforeenteringSleep
orAutoOff.
C) TheWake/AutoOnEventsselectiondetermineshowtheprintergoestosleepandhowit
awakes:
 AllEvents:theprinterwillgointoSleepandbeawakenedforprintjobs.
 NetworkPort:theprinterwillgointoAutoOffandbeawakenedbynetwork
activity.This
isthe“normal”AutoOn/AutoOffmodethatprovidesoptimumenergysavings.
 PowerButtonOnly:TheprinterwillgointoOffandcanonlybereturnedtoserviceby
pressingthePowerbutton.Whenthepowerbuttonispressed,theprinterwillperforma
fullbootup.

Forthesesettings,theprinterwillenterthespecifiedpowersavingmodeafteraperiodofinactivity,
asspecifiedbytheSleep/AutoOffAftervalue.Thistimerisenable dwiththeEnableSleep/Auto
OffTimercheckbox.