2. To remove the PCA and holder: Remove one screw (callout 1), and then release one tab
(callout 2).
Figure 1-251 Remove the second-transfer high-voltage power supply and holder (2 of 3)
1
2
3. Release one FFC (callout 1) from the retainer (callout 2), and then carefully separate the PCA or
the PCA and holder (callout 3) from the product.
Figure 1-252 Remove the second-transfer high-voltage power supply and holder (3 of 3)
3
1
2
ENWW
Main assemblies
183
To Next Page
Loading...