HCI left cover
Before proceeding, remove the following assemblies:
●
HCI left tray. See
HCI left tray on page 265.
1. Release one tab (callout 1), and then move the lock lever (callout 2) into the unlocked position.
Figure 1-360 Remove the HCI left cover (1 of 3)
1
2
2. Remove one screw (callout 1), and then remove the left cover (callout 2) from the HCI.
Figure 1-361 Remove the HCI left cover (2 of 3)
2
1
266 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...