HP LASERJET ENTERPRISE 700 COLOR MFP M775dn - Page 311

HCI right tray lifter drive
Before proceeding, remove the following assemblies:
●
HCI left tray. See
HCI left tray on page 265.
●
HCI left cover. See
HCI left cover on page 266.
●
HCI rear cover. See
HCI rear cover on page 270.
Remove the HCI right tray lifter drive
Disconnect one connector (callout 1), remove three screws (callout 2), and then remove the right tray
lifter drive (callout 3).
Figure 1-378 Remove the HCI right tray lifter drive
2
3
1
ENWW
Input devices
281
DRAFT