Stapler/stacker right door
Before proceeding, remove the following assemblies:
●
Stapler/stacker rear cover. See
Stapler/stacker rear cover on page 299.
Remove the stapler/stacker right door
1. Open the right door.
2. Release one tab (callout 1), and then remove the cover (callout 2).
Figure 1-406 Remove the stapler/stacker right door (1 of 4)
1
2
3. Disconnect one connector (callout 1).
Figure 1-407 Remove the stapler/stacker right door (2 of 4)
1
ENWW
Output devices
303
To Next Page
Loading...