Stapler/stacker left lower cover
Before proceeding, remove the following assemblies:
●
Stapler/stacker front right cover. See
Stapler/stacker front right cover on page 301.
●
Stapler/stacker rear cover. See
Stapler/stacker rear cover on page 299.
●
Stapler/stacker left rear cover. See
Stapler/stacker left rear cover on page 305.
●
Stapler/stacker output bin assembly. See
Stapler/stacker output bin assembly on page 306.
Remove the stapler/stacker left lower cover
Release two screws (callout 1), and then remove the cover (callout 2).
Figure 1-413 Remove the stapler/stacker left lower cover
2
1
308 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...