NOTE: If the product contains an HP Jetdirect EIO print server or an optional hard disk
drive, additional configuration pages print that provide information about those options.
b. Open a Web browser window.
c. In the address line of the browser, type ftp://<IPADDRESS>, where <IPADDRESS> is the
TCP/IP address of your product. For example, if the TCP/IP address is 192.168.0.10, type
ftp://192.168.0.10.
d. Press the Enter button.
Figure 3-24 Scan Setup Wizard — Contacting Device screen
ENWW
Create a network folder by using the Scan Setup Wizard
47
To Next Page
Loading...
