The pickup, feed, and delivery system is divided into three parts:
●
The pickup and feed block contains the paper path from each tray and stops at the fuser
entrance.
●
The fusing/switchback/delivery block contains the paper path from the fuser entrance to
the output device.
●
The duplex block contains the paper path to reverse the paper in the duplex reverse area for
two-sided printing
Figure 1-19 Pickup, feed, and delivery system
Simplex paper path
Duplex paper path
DC controller
Fuser-switchback-and-delivery block
Pickup-and-feed block
Duplex block
30 Chapter 1 Theory of operation ENWW
To Next Page
Loading...
