Table 2-2 Preboot menu options (2 of 6)
Menu option First level Second level Third level Description
Administrator
continued
Manage Disk Clear disk Select the Clear disk item to disable using an external device
for job storage. Job storage is normally enabled only for the
Boot device. This will be grayed out unless the 99.09.68
error is displayed.
Lock Disk Select the Lock Disk item to lock (mate) a new secure disk to
this product.
The secure disk already locked to this product will remain
accessible to this product. Use this function to have more
than one encrypted disk accessible by the product when
using them interchangeably.
The data stored on the secure disk locked to this product
always remains accessible to this product.
Leave Unlocked Select the Leave Unlocked item to use a new secure disk in
an unlocked mode for a single service event. The secure disk
that is already locked to this product will remain accessible
to this product and uses the old disk's encryption password
with the new disk.
The secure disk that is already locked to this product remains
accessible to this product.
Clear Disk Pwd Select the Clear Disk Pwd item to continue using the non-
secure disk and clear the password associated with the yet-
to-be installed secure disk.
CAUTION: Data on the missing secure disk will be
permanently inaccessible.
Retain Password Select the Retain Password item to use the non-secure disk
for this session only, and then search for the missing secure
disk in future sessions.
Boot Device Secure Erase Select the Secure Erase item to erase all of the data on the
disk and unlock it if required.
This might take a long time.
NOTE: The system will be unusable until the system files
are reinstalled. The ATA secure-erase command is a one-
pass overwrite, which erases the entire disk including
firmware. The disk remains an encrypted disk.
Erase/Unlock Select the Erase/Unlock item to cryptographically erase all
data on the disk and unlock the disk to allow a user to gain
access to it from any product.
NOTE: The system will be unusable until the system files
are reinstalled. It erases the encryption key. The encryption
key is erased, so the disk becomes a non-encrypted disk.
Get Status This item provides disk status information if any is available.
ENWW
Preboot menu options
119
To Next Page
Loading...