Color band test
The color-band test page shows bands of colors that can indicate whether the product is producing
colors correctly.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Troubleshooting
●
Print Quality Pages
●
Color Band Test
Print quality troubleshooting tools
Repetitive defects ruler
If defects repeat at regular intervals on the page, use this ruler to identify the cause of the defect. Place
the top of the ruler at the first defect. The marking that is beside the next occurrence of the defect
indicates which component needs to be replaced.
NOTE: When printing this defect ruler, verify that any scaling options in the print driver are disabled.
Figure 2-49 Repetitive defects ruler
0 mm
35 mm
42 mm
79 mm
60 mm
94 m m
76 m m
80 mm
50 mm
Distance between defects Product components that cause the defect
27 mm Toner cartridge: primary charge roller
ENWW
Tools for troubleshooting
201
To Next Page
Loading...