Table 2-37 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Auto Sense Mode Tray 1 Sensing Full sensing
Expanded sensing*
Transparency Only
Use the Auto Sense
Mode feature to
configure which
paper types the
product should
automatically sense.
The following settings
are available:
Full sensing: Use this
setting if you don't
want media type
misprints and can
accept slower
performance and
possible decreased
cartridge life.
Expanded sensing:
The product senses
only the first page
and assumes the rest
of the pages are the
same type.
Transparency Only:
The product senses
only the first page.
The product
distinguishes
transparencies from
other paper types.
Tray X Sensing Expanded sensing*
Transparency Only
When Configuring
the Auto Sense Mode
option for Tray 1 and
Tray 2, the <x>
variable represents
the highest number of
trays installed on the
product.
Adjust Paper Types Select from a list of
paper types that the
product supports.
The available
options are the same
for each paper type.
Print Mode Select from a list of
print modes.
Changing the Print
Mode setting is
usually the first step
in trying to resolve
print-quality
problems. Problems
can include toner not
sticking well to the
page, a faint image
of the page repeated
on the same or
following page,
incorrect gloss level,
etc.
ENWW
Tools for troubleshooting
211
To Next Page
Loading...