HP LASERJET ENTERPRISE M775dn - Page 247

Table 2-37 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Uniformity Control Normal*
Alternate 1
Alternate 2
Alternate 3
This setting might
help correct
uniformity in print
quality issues, such
as a mottled
appearance due to
poor transfer of toner
onto the page. The
Alternate 1 setting
increases the T1
transfer bias and can
be used for any
media type. The
Alternate 2 setting
decreases the fuser
temperature and
reduces the
throughput. Use this
setting if you are
experiencing mottled
output due to poor
fusing on normal or
light paper types.
The Alternate 3
setting applies the
Alternate 1 setting
and the Alternate 2
setting at the same
time. Use this setting
if the first two settings
do not correct the
problem.
Tracking Control On*
Off
Normally, this setting
should be set to On.
Tracking control
algorithm is turned
ON/OFF. It is not
expected that the
customer will ever
need to change this
setting.
Registration Normal*
Alternate
Use this setting if you
are having trouble
with color-planes
shifting or
overlapping on the
page. Use the
Alternate setting if
you are seeing color
mis-registration
problems.
ENWW
Tools for troubleshooting
215