HP LASERJET ENTERPRISE M775dn - Page 249

Table 2-37 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Restore Optimize Use to return all the
settings in the
Optimize menu to the
factory-default
values.
Resolution Image Ret 3600
1200 x 1200dpi
Sets the resolution at
which the product
prints.
Edge Control Off
Light
Normal*
Maximum
This setting
determines how
edges are rendered.
Edge Control has
two components:
adaptive halftoning
and trapping.
Adaptive halftoning
increases edge
sharpness. Trapping
reduces the effect of
color-plane
misregistration by
overlapping the
edges of adjacent
objects slightly.
Select one of the
following options:
Off: Turns off both
trapping and
adaptive halftoning.
Light: Sets trapping
at a minimal level,
and adaptive
halftoning is on.
Normal: Trapping is
at a medium level
and adaptive
halftoning is on.
Maximum: Trapping
is at the highest level,
and adaptive
halftoning is on.
ENWW
Tools for troubleshooting
217