Copy Settings menu
To display: At the product control panel, select the Administration menu, and then select the Copy
Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-38 Copy Settings menu
First level Second level Third level Values Description
Copies 1–9999
Default = 1
Configure the default
options for copy jobs. If
the user does not specify
the job options when
creating the job, the
default options are used.
Sides 1-sided original, 1-sided
output*
2-sided original, 2-sided
output
1-sided original, 2-sided
output
2-sided original, 1-sided
output
Use to indicate whether
the original document is
printed on one or both
sides, and whether the
copies should be printed
on one or both sides. For
example, select 1-sided
original, 2- sided output
when the original is
printed on one side, but
you want to make two-
sided copies.
Orientation Portrait* Specify portrait or
landscape orientation and
select the way the second
sides are printed.
Portrait orientation means
the short edge of the page
is along the top.
Landscape Landscape orientation
means the long edge of
the page is along the top.
ENWW
Tools for troubleshooting
221
To Next Page
Loading...