4. Paper could be jammed inside the fuser where
it would not be visible. Grasp the blue handles
on both sides of the fuser, and pull the fuser
straight out of the product.
WARNING! Even if the body of the fuser
has cooled, the rollers that are inside could still
be hot. Do not touch the fuser rollers until they
have cooled.
5. Pull forward on the green tab to open the fuser
jam-access door. If paper is jammed inside the
fuser, pull the paper straight up to remove it.
420 Chapter 2 Solve problems ENWW
To Next Page
Loading...