Figure 1-165 Job offset operation (1 of 2)
Rear aligning plate
Sheet to be oset
Front aligning plate
Tray
Figure 1-166 Job offset operation (2 of 2)
Rear aligning plate
Sheet to be oset
Front aligning plate
Tray
Table 1-64 Motors for the stack job offset
Motor Function
Front-aligning-plate motor (M103) Aligns paper in the processing output bin to the front
Rear-aligning-plate motor (M104) Aligns paper in the processing output bin to the rear
Swing motor (M106) Moves the swing guide up/down
Stack trailing-edge assist motor (M109) Carry the stack end during stack ejection
ENWW Booklet maker and booklet maker with hole punch 193
To Next Page
Loading...