Information pages
Information pages reside within the product memory. These pages help diagnose and solve problems
with the product.
NOTE: If the product language was not correctly set during installation, you can set the language
manually so the information pages print in one of the supported languages. Change the language by
using the System setup menu on the control panel. See
Control panel on page 9.
Page description How to print the page
Configuration page
Shows the current settings and product properties.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons to select Config report, and then
press OK.
A second page also prints. On that page, the Fax Settings
section provides details about the product fax settings.
Demo page
Contains examples of text and graphics.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons to select Demo page, and then
press OK.
Menu map
Shows the control-panel menus and available settings.
1. On the product control panel, press Setup.
2. Use the arrow buttons to select Reports, and then press
OK.
3. Use the arrow buttons to select Menu structure, and then
press OK.
Fax reports For information about fax logs and reports, see Fax logs and
reports on page 113.
122 Chapter 11 Manage and maintain the product ENWW
To Next Page
Loading...