HP LaserJet M1319 Series - Physical specifications; Electrical specifications; Power consumption

Physical specifications
Table C-1 Physical specifications
Product Height Depth Width Weight
HP LaserJet M1319 459 mm (18.1 inches) 443 mm (17.3 inches) 429 mm (16.9 inches) 10 kg (22 lb)
Electrical specifications
CAUTION: Power requirements are based on the country/region where the product is sold. Do not
convert operating voltages. This will damage the product and void the product warranty.
Table C-2 Electrical specifications
Item 110-volt models 230-volt models
Power requirements 110 to 127 V (+/- 10%)
50 / 60 Hz (+/- 2 Hz)
220 to 240 V (+/- 10%)
50 / 60 Hz (+/- 2 Hz)
Rated current 4.5 A 2.6 A
Power consumption
Table C-3 Power consumption (average, in watts)
1
Product model Printing
2
Copying
2
Ready/Sleep
3
Off
HP LaserJet M1319 290 W 225 W 5 W <0.1 W
1
Values are based on preliminary data. See www.hp.com/support/ljm1319 for current information.
2
Power reported is highest values measured using all standard voltages.
3
Instant on fuser technology.
4
Recovery time from Ready/Sleep to start of printing = 8.5 seconds.
5
Maximum heat dissipation for all models in Ready mode = 45 BTU/hour
172 Appendix C Specifications ENWW