HP LaserJet M1522 Series – Scan
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
1
www.hp.com
E-mail my scan
How do I? Steps to perform
Scan to a file, e-mail, or software program
NOTE: To use this feature in Windows, a destination must
be programmed in the scan setup before scanning to a
destination.
1 Load the originals that are to be scanned face-up in
the automatic document feeder (ADF) input tray, with
the top of the document forward, and adjust the media
guides.
-Or-
Lift the flatbed scanner lid and load the original that is
to be scanned face-down on the flatbed scanner with
the top, left corner of the document located at the
corner indicated by the icon on the scanner. Gently
close the lid.
2 On the product control panel, press Scan To.
3 Use the arrow buttons to select a file destination.
4 Press Start Scan or OK to scan the document to a
file.
E-mail
To Next Page
Loading...