Device Status
Use the Device Status screen to view the current status of the product. The following illustration and
table describe how to use this screen.
Figure 2-1 Device Status screen
Table 2-1 Device Status
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and
menus
For more information, see Navigating through the HP Embedded Web Server.
2 Status Shows the device status (the same information that appears on the control-panel
display).
3 Control-panel buttons Use these control-panel buttons just as you would at the product. To select which
control-panel buttons appear on this screen, go to the Security screen on the
Settings tab.
4 Supplies Shows the percentage of life remaining for each supply.
NOTE The HP EWS also displays the status information for the staples
cartridge for the HP LaserJet M5025mfp and the HP LaserJet M5035mfp
products only.
5 Supplies Details Opens the Supplies Status screen, where you can view information about product
supplies.
6 Media Shows the status and configuration information for the input trays and output bins.
8 Chapter 2 Viewing product status from the HP EWS Information screens ENWW
To Next Page
Loading...
