Generally, a software program is WIA-compliant if it has a command such as Picture/From Scanner
or Camera in the Insert or File menu. If you are unsure whether the program is WIA-compliant, see
the software program Help or documentation.
Start the scan from within the WIA-compliant program. See the software program Help or
documentation for information about the commands and steps to use.
-Or-
From the Windows control panel, in the Cameras and Scanner folder (located inside the Hardware
and Sound folder for Windows Vista and Windows 7), double-click the product icon. This opens the
standard Microsoft WIA Wizard, which enables you to scan to a file.
Scan by using optical character recognition (OCR) software
The Readiris OCR program is included on a separate CD that shipped with the product. To use the
Readiris program, install it from the appropriate software CD, and then follow the instructions in the
online Help.
Cancel a scan
To cancel a scan job, use one of the following procedures.
●
On the product control panel, press the Cancel
button.
●
Click the Cancel button in the on-screen dialog box.
ENWW Use scan functions 123
To Next Page
Loading...
