HP LaserJet Pro 100 - HP Color LaserJet Printer Drivers

Covers and document feeder
Right cover
1. Open the document feeder.
2. Remove one screw (callout 1), and then starting at the rear vertical edge, release six tabs
(callout 2) and remove the right cover.
NOTE: Before proceeding, take note of the locations of the tabs (callout 1) on the back side of
the cover. See
Figure 1-10 Remove the right cover (2 of 2) on page 16.
Figure 1-9 Remove the right cover (1 of 2)
1
2
Figure 1-10 Remove the right cover (2 of 2)
1
16 Chapter 1 Removal and replacement ENWW