Left cover
1. Open the document feeder.
2. Remove one screw (callout 1), and then starting at the rear vertical edge, release two tabs
(callout 2) and remove the left cover.
NOTE: Before proceeding, take note of the locations of the tabs (callout 1) on the back side of
the cover. See
Figure 1-12 Remove the left cover (2 of 2) on page 17.
Figure 1-11 Remove the left cover (1 of 2)
2
1
Figure 1-12 Remove the left cover (2 of 2)
1
ENWW
Removal and replacement procedures
17
To Next Page
Loading...
