Need help?Do you have a question about the HP LASERJET M575 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Resolution | Up to 1200 x 1200 dpi |
| Scan Type | Flatbed, ADF |
| Copy Resolution | Up to 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Functions | Print, Copy, Scan, Fax |
| Scan Resolution | Up to 1200 dpi |
| Mobile Printing Capability | HP ePrint, Apple AirPrint |
| Duplex Printing | Yes |
| Memory | 1 GB |
| Maximum Paper Size | A4 |
| Connectivity | USB, Ethernet |
This chapter covers the removal and replacement of field-replaceable units (FRUs).
Strategy for replacing FRUs, including notes, tips, and unsupported component-level repair.
Cautions regarding power handling, laser scanner safety, and sheet-metal part handling.
Guidance on handling ESD-sensitive parts and precautions for service work.
List of essential tools needed for removal and replacement procedures.
Product repair begins with diagnostics, then assembly-level replacement of FRUs.
Pre-service steps including media removal, power down, and grounding.
Post-service steps including power connection, reinstallation of parts, and feeder placement.
Tests to verify successful repair or replacement.
Procedure to test print quality by printing configuration and demo pages.
Procedure to test copy quality using document feeder and scanner glass.
Procedure for removing and replacing toner cartridges, with cautions on handling.
Procedure for removing the fuser, with a caution about its heat.
Procedure for removing the hard drive (HDD), noting firmware reload requirement.
Procedure to lift the control panel, reveal thumbscrews, and disconnect connectors.
Procedure to remove four screws, release three connectors, and remove cable cover.
Procedure to release eight connectors, one FFC, and two screws to remove the SCB.
Procedure to remove one screw and bracket, disconnect all connectors, and remove PCA.
Procedure to disconnect six connectors, release retainer, and remove three screws.
Steps to remove two screws and cover, release wire harnesses, and remove one screw.
Steps to disconnect two connectors, remove three screws, and remove the assembly.
Procedure to remove five screws and plate, disconnect connector, release tab, remove guide.
Information on obtaining replacement parts, supplies, and accessories directly from HP.
Details on CSR levels (A, B, N) for installing assemblies and service kits.
Diagrams showing the location of major assemblies on the base product.
Diagrams and part numbers for external covers, panels, and doors.
Exploded view and part numbers for ADF and scanner assemblies on M575c models.
Diagram and part numbers for the control panel assembly and its components.
Diagram and part numbers for various ADF components.
Diagram and part numbers for scanner components.
Diagrams and part numbers for various internal assemblies of the product.
Diagrams and part numbers for Printed Circuit Assemblies (PCAs).
To Next Page
