4. Push up on the rear-top cover (callout 1) to slightly raise the delivery cover (callout 2) to release
two rear-top cover tabs (callout 3) along the rear edge of the product.
Figure 1-22 Remove the top door, rear-top cover, and delivery cover (4 of 6)
3
1
2
5. Open the top door (callout 1), rotate the delivery cover and rear-top cover (callout 2) away from
the product, and then slide the door and covers towards the front of the product to release the
assembly.
Figure 1-23 Remove the top door, rear-top cover, and delivery cover (5 of 6)
2
1
24 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
