6. Remove the top door (callout 1) , delivery cover (callout 2), and rear-top cover (callout 3)
assembly.
Figure 1-24 Remove the top door, rear-top cover, and delivery cover (6 of 6)
1
3
2
Reinstall the top door, rear-top cover, and delivery cover
Before reassembly, make sure that the two cartridge lock springs (callout 1; located to the right and left
of the print-cartridge opening) are not damaged.
Figure 1-25 Reinstall the top door, rear-top cover, and delivery cover (1 of 2)
1
ENWW
Removal and replacement procedures
25
To Next Page
Loading...
