Detailed Windows installation instructions
The dialog boxes shown here appear in the Windows XP Professional installation sequence. The
order and appearance of dialog boxes can vary among operating systems.
Use the Recommended installation with HP Smart Install or the CD
NOTE: If HP Smart Install does not start automatically, AutoPlay might be disabled on your
computer. Browse to the computer and double-click the HP Smart Install CD drive. Double-click the
Setup.exe file to run the program to install the product. If you cannot find the HP Smart Install CD
drive, use the software CD to install the product.
NOTE: The full software install requires the Microsoft .NET Framework 3.51 to be installed on the
computer. If the correct .NET framework is not installed, only the print and scan drivers will be
installed.
1. Connect the product to the computer using a USB cable. The HP Smart Install program will start,
and a licensing agreement dialog will open.
Figure 2-47 HP Smart Install — License agreement screen
ENWW
Detailed Windows installation instructions
93
To Next Page
Loading...
