Optional Tray 3
●
Tray capacity and paper orientation
●
Load Tray 3
Tray capacity and paper orientation
To prevent jams, do not overfill trays. Be sure the top of the stack is below the tray-full indicator. For short/
narrow and heavy/glossy paper, load paper to less than half of the tray-full indicators.
Table 2-6 Tray 3 capacity
Paper type Specifications Quantity
Paper Range:
60 g/m
2
(16 lb) to 220 g/m
2
(58 lb)
Equivalent to 500 sheets of 75 g/m
2
(20 lb)
Maximum stack height: 56 mm (2.2 in)
Labels Maximum: 0.102 mm (0.004 in) thick Maximum stack height: 56 mm (2.2 in)
Transparencies Minimum: 0.102 mm (0.004 in) thick Maximum stack height: 56 mm (2.2 in)
Glossy paper Range:
105 g/m
2
(28 lb) to 220 g/m
2
(58 lb)
Maximum stack height: 56 mm (2.2 in)
Table 2-7 Tray 3 paper orientation
Paper type Image orientation Duplex mode How to load paper
Preprinted or letterhead Portrait 1-sided printing Face-up
Top edge at the right side of the tray
2-sided printing Face-down
Top edge at the left side of the tray
26 Chapter 2 Paper trays ENWW
To Next Page
Loading...