Load the document feeder
The document feeder holds up to 35 sheets of 60-90 g/m
2
(16 to 20 lb bond) paper.
NOTE: When you add new paper, make sure that you remove all of the paper from the input tray and
straighten the stack of new paper. Do not fan the paper. This reduces jams by preventing multiple sheets
of paper from feeding through the product at one time.
CAUTION: To prevent damage to the product, do not load an original document that contains
correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals,
or fragile originals into the document feeder.
1. Insert the originals into the document feeder
face-up.
2. Adjust the guides until they are snug against
the paper.
ENWW Load the document feeder 71
To Next Page
Loading...