Left cover assembly
Remove the left cover assembly
1. Open the top door.
2. Remove one screw (callout 1), and then starting at the rear vertical edge, release two tabs (callout
2) and remove the left cover assembly (callout 3).
NOTE: Before proceeding, take note of the locations of the tabs (callout 2) on the back side of
the cover. See
Figure 1-11 Remove the left cover, duplex product (2 of 2) on page 19.
Figure 1-10 Remove the left cover (1 of 2)
3
1
2
Figure 1-11 Remove the left cover, duplex product (2 of 2)
2
ENWW
Removal and replacement procedures
19
To Next Page
Loading...
