1
2
3
4
5
Select the option that indicates how you connect to
the Internet, and then click Next.
If you selected PPPoE or Static IP, ll in the
appropriate information, and then click Next.
M1210
HOTSPOT SETUP GUIDE
LASERJET PRO M1210 SERIES
A hotspot-enabled product has the ability to provide wireless Internet access for your computer, smart phone, or tablet.
This product supports the following types of connections:
PPPoE (Point-to-Point Protocol over Ethernet) Dynamic or Static IP address with router
Option 1: Configure hotspot at software installation
After having installed the printer driver, select the option
to Enable Hotspot & Direct Print, and then click Next.
Select one of the Security Mode options, and then
click Next. The options include:
WPA/WPA2:• maximum security (recommended)
WEP:• medium security
Disable:• no security (not recommended)
You also have the option to set up a custom SSID.
Connect the product to a computer with the USB
cable, and then click Next.
Before continuing with this procedure, set up the product rst by following the
Installation Guide.
You have three options to set up the hotspot feature.
Note: This product does not support bridge or
repeater modes.
Scan the QR code to download
HP mobile apps.
(This procedure is continued on the next page.)
© 2012 Hewlett-Packard Development Company, L.P.
www.hp.com
To Next Page
Need help?
General
