Need help?Do you have a question about the HP LaserJet Pro M1214nfh - Multifunction Printer and is the answer not in the manual?
General| Printer Type | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Speed (Black) | Up to 19 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed (Black) | Up to 19 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scanner Type | Flatbed, ADF |
| Fax Modem Speed | 33.6 kbps |
| Monthly Duty Cycle | Up to 8, 000 pages |
| Recommended monthly page volume | 250 to 2, 000 pages |
| Paper Handling Input | 150 sheets |
| Paper Handling Output | 100 sheets |
| Duplex Printing | Manual (driver support provided) |
| Display | 2-line LCD |
| First page out black (A4, ready) | 8.5 seconds |
| Scan Resolution | Up to 1200 dpi |
| Connectivity | USB, Ethernet |
| Mobile Printing | HP ePrint |
| Media sizes supported | A4 |
| Media types | Envelopes |
Connect the power cord to a grounded AC outlet and the product.
Turn on the product after connecting the power cord.
Use arrow buttons to select language/location and press OK.
Slide and tilt the control panel for better viewing.
Connect USB cable to start HP Smart Install program automatically.
Adhere to the prompts during the installation process.
Choose the USB printing option when prompted.
Connect network cable, wait for IP assignment.
Use Setup button to get Config report and find IP.
Use browser to enter IP, find HP Smart Install tab, and download.
Insert the installation CD into the computer's CD drive.
Connect USB cable and power on the product before installing.
Click the installer program in the pop-up dialog.
Follow onscreen instructions to install the driver.
Connect phone cords for fax and handset, use adapter if needed.
Use HP Fax Setup Wizard for date, time, and header info.
Product prints page explaining control panel use after setup.
Refer to the user guide on the product CD for details.
Load description page, press Start Copy button to test feeder.
Press any button to wake the product from energy-saving mode.
Place description page on scanner glass, press Start Copy.
Load description page on scanner glass.
Select Scan to and destination in HP program group.
Use HP Director to scan, name file, and specify location.
Use M1-M3 and Store buttons for programming numbers.
Use Redial/Pause for redialing and Flash for busy lines.
Answer the phone, wait for fax tones to be detected.
Hang up the handset after the phone becomes silent.
Load document, then call recipient using handset.
Press Start Fax on control panel when recipient is ready.
Visit www.register.hp.com to register if not done during installation.
Find the Guide on the product CD or computer's HP Program folder.
Access product info, web support, troubleshooting, and safety info.
© 2010 Hewlett-Packard Development Company, L.P. Reproduction details.
Equipment tested and found to comply with FCC Part 15 rules.
Windows® is a registered trademark of Microsoft Corporation.
To Next Page