EasyManuals Logo

HP LaserJet Pro M129 Getting Started Guide

HP LaserJet Pro M129
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Dansk ................ 19
Català ................ 16
Español ............. 13
Italiano .............. 10
Deutsch ............... 7
Français ............... 4
English................. 1
Norsk ................. 37
Lietuvių ............. 34
Latviešu ............. 31
Suomi ................ 28
Eesti................... 25
Nederlands ........ 22
Svenska ............. 43
Português ......... 40
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
Windows
1. Do not connect the USB cable before installing the software. The
installation process prompts to connect the cable at the appropriate
time. If the cable is already connected, restart the printer when
installation prompts to connect the cable.
2. Continue to “6. Download and install the software.”
OS X
1. Connect the USB cable between the computer and the printer before
installing the software.
2. Continue to “6. Download and install the software.”
Wireless network connection
(wireless models only)
Touchscreen control panels
1. To connect the printer to a wireless (Wi-Fi) network, on the printer control
panel, touch the Wireless button.
2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select
the network name from the SSID list, or enter the network name if it is
notlisted.
3. Use the keyboard to enter the passphrase, and then touch the OK button.
4. Wait while the printer establishes a network connection.
5. On the printer control panel, touch the Network button. If an IP address
is listed, the network connection has been established. If not, wait a few
more minutes and try again. Note the IP address for use during software
installation. Example IP address: 192.168.0.1
2-line/LED control panels
1. To connect the printer to a wireless (Wi-Fi) network, make sure that the
printer, access point, and computer are turned on and that the computer is
connected to the wireless network.
2. A USB cable might be required during software installation.
3. To print from a computer, continue with “6. Download and install the
software.” To print from a phone or tablet only, continue with “7.
Mobile
printing (optional).”
Wired (Ethernet) network connection
(optional)
Use a standard network cable.
1. Connect the network cable to the printer and to the network. Wait a few
minutes for the printer to acquire a network address.
2. Continue to “6. Download and install the software.”
5.
Select a connection method
Manually congure the IP address
See the printer user guide for information on how to manually congure the
IPaddress www.hp.com/support/ljM129MFP.
www.hp.com/support/ljM129MFP www.register.hp.com
IMPORTANT:
Follow
Steps 1 - 3 on
the printer hardware setup
poster, then continue
with Step 4.
4.
Set up the control panel
At the printer control panel, check the display status before beginning software installation.
LaserJet Pro MFP M129-M132,
LaserJet Ultra MFP M133-M134
Getting Started Guide

Other manuals for HP LaserJet Pro M129

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LaserJet Pro M129 and is the answer not in the manual?

HP LaserJet Pro M129 Specifications

General IconGeneral
Print Speed BlackUp to 22 ppm
Resolution BlackUp to 600 x 600 dpi
Print TechnologyLaser
Display2-Line LCD
Duplex PrintingManual
Envelope Input CapacityUp to 10 envelopes
Output Tray CapacityUp to 100 sheets
FunctionsPrint, copy, scan
Mobile Printing CapabilityHP ePrint, Apple AirPrint
Wireless CapabilityYes
Connectivity, StandardHi-Speed USB 2.0
Network ReadyYes
Media Sizes SupportedA4; A5; A6; B5 (JIS)
Media Typesenvelopes, labels, cardstock
Scan TypeFlatbed
Operating Systems SupportedWindows
WarrantyOne-year limited hardware warranty

Related product manuals