HP LASERJET PRO M1530 - Page 69

Main motor
Before proceeding, remove the following components:
●
Main tray. See
Main tray on page 10.
●
Output bin extension. See
Output bin extension on page 11.
●
Left cover. See
Left cover on page 12.
●
Scanner assembly. See
Scanner assembly on page 15.
●
Right cover. See
Right cover on page 19.
●
Cartridge door. See
Cartridge door on page 24.
●
Front cover. See
Front cover on page 27.
●
Upper cover. See
Upper cover on page 28.
Remove the main motor
1. Release one tab (callout 1), and then slide the holder forward (callout 2), and lift it up to remove
it.
Figure 1-72 Remove the main motor (1 of 9)
1
2
ENWW Removal and replacement procedures 49