Scanner components
NOTE: This section describes replacement and removal of individual scanner components. To
remove the complete scanner assembly, see
Scanner assembly on page 15.
Document feeder input tray
1. Open the document feeder cover.
Figure 1-119 Remove the document feeder input tray (1 of 2)
2. Hold the scanner cover down, and then pull up on the document feeder tray to release two tabs,
lift the document feeder tray up, and then remove it.
Figure 1-120 Remove the document feeder input tray (2 of 2)
ENWW Removal and replacement procedures 77
To Next Page
Loading...
