Restore the factory-set defaults
Restoring the factory-set defaults returns all of the product and network settings to the factory defaults. It
will not reset the page count, tray size, or language. To restore the product to the factory-default settings,
follow these steps.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also
deletes any pages that are stored in the memory. The procedure then automatically restarts the product.
1. On the product control panel, press the OK button to open the menus.
2. Open the following menus:
●
Service
●
Restore Defaults
The product automatically restarts.
ENWW Restore the factory-set defaults 53
To Next Page
Loading...