Use billing codes
1. Load the document in the document feeder or on the scanner glass.
2. From the Home screen on the product control panel, touch the Fax button.
3. Enter the fax number, or select a speed-dial or group-dial entry.
4. Touch the Start Fax button.
5. Enter the billing code, and then touch the OK button.
Print the billing-code report
The billing-code report is a printed list of all the fax billing codes and the total number of faxes billed to
each code. This report is available only when the billing code feature is on.
NOTE: After the product prints this report, it deletes all billing data.
1. From the Home screen on the product control panel, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Fax Reports button.
4. Scroll to and touch the Print Billing Report button.
ENWW
Configure send fax settings
121
To Next Page
Loading...
