An answering machine is connected to the product
●
Set the Answer Mode option to the TAM setting and connect the answering machine to the
“telephone” port.
a.
From the Home screen on the product control panel, touch the Setup
button.
b. Open the Fax Setup menu.
c. Open the Basic Setup menu.
d. Open the Answer Mode menu.
e. Select the TAM setting.
If the TAM setting is unavailable, set the Answer Mode option to the Automatic setting.
●
Set the Rings to Answer setting to at least one ring more than the number of rings for which the
answering machine is set.
a.
From the Home screen on the product control panel, touch the Setup
button.
b. Open the Fax Setup menu.
c. Open the Basic Setup menu.
d. Open the Rings to Answer menu.
e. Select the correct setting.
●
Connect the answering machine to the “telephone” port.
●
If the product has a telephone handset connected, set the Answer Mode option to the Fax/Tel
setting to route calls to the correct device. When detecting a voice call, the product generates a
ring tone that alerts you to pick up the telephone handset.
a.
From the Home screen on the product control panel, touch the Setup
button.
b. Open the Fax Setup menu.
c. Open the Basic Setup menu.
d. Open the Answer Mode menu.
e. Select the Fax/Tel setting.
The Answer Mode setting is set to the Manual setting
●
Touch the Start Fax button on the product control panel.
212 Chapter 9 Solve problems ENWW
To Next Page
Loading...
