Product updates
HP offers periodic updates to the product firmware. You can load the firmware updates manually, or you can
set the product to automatically load firmware updates.
Manually update the firmware
1. From the Home screen on the product control panel, touch the OK button.
2. Open the following menus:
●
Service
●
LaserJet Update
●
Check For Updates Now
3. Press the Yes button to prompt the product to search for firmware updates. If the product detects an
update, it will begin the update process.
Set the product to automatically update the firmware
1. From the Home screen on the product control panel, touch the OK button.
2. Open the following menus:
●
Service
●
LaserJet Update
●
Manage Updates
●
Prompt Before Install
3. Press the Install automatically option.
94 Chapter 2 Solve problems ENWW
To Next Page
Loading...