HP LaserJet Pro M706 - Declaration of Conformity

Declaration of conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name: Hewlett-Packard Information Technology
R&D (Shanghai) Co., LTD
DoC#: SHNGC-1300-00 rel2
Manufacturer's Address: Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China
declares, that the product
Product Name: HP LaserJet Pro M701a/HP LaserJet Pro M701n
Regulatory Model:
2)
SHNGC-1300-00
Product Options: All
Toner Cartridges: CZ192A
conforms to the following Product Specifications:
SAFETY: IEC 60950-1:2005 +A1:2009 / EN60950-1: 2006 +A11:2009+A1:2010 +A12:2011
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62479:2010/EN 62479:2010
GB4943.1-2011
EMC:
CISPR22:2008/ EN55022:2010- Class A
1) 3)
EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008
EN 55024:2010
FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 5
GB9254-2008, GB17625.1-2003
RoHS EN50581:2012
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC, the RoHS
Directive 2011/65/EU and carries the CE-Marking
accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1. The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2. For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing names
or the product number(s).
3. The product meets the requirements of EN55022 & CNS13438 Class A in which case the following applies: “Warning – This is a class A product.
In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures”.
Shanghai, China
May 24, 2013
For Regulatory Topics only, contact:
ENWW Declaration of conformity 115