Table 3-3 Control-panel light patterns
Light status State of the product Action
All lights are off. The product is in Auto-Off mode or is
turned off.
Press the power button to deactivate the
Auto-Off mode or to turn on the product.
Status lights cycle The status lights cycle during the
formatter initialization period or when the
product is processing a cleaning page.
No action is required. Wait for the
initialization period to end. The product
enters the ready state when the
initialization period is finished.
Ready light is on, and attention light is
off.
The product is in the ready state. No action is required. The product is
ready to receive a print job.
Ready light is blinking, and attention
light is off.
The product is receiving or processing
data.
No action is required. The product is
receiving or processing a print job.
104 Chapter 3 Solve problems ENWW
To Next Page
Loading...