Front cover
Before proceeding, remove the following components:
●
Input tray or main-input tray. See
Input tray or main-input tray on page 40.
●
Output bin tray extension. See
Output bin tray extension on page 41.
Remove the front cover
1. Place the product rear-side up.
CAUTION: Dirt and debris can scratch the product covers. Place the product on a cloth or other
clean surface.
2. Release two tabs (callout 1), and then remove the front cover (callout 2).
Figure 2-9 Remove the front cover
1
2
42 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...