Left cover
NOTE: For the HP LaserJet Professional P1100w Printer series, removing the left cover also removes
the control panel.
Before proceeding, remove the following components:
●
Input tray or main-input tray. See
Input tray or main-input tray on page 40.
●
Output bin tray extension. See
Output bin tray extension on page 41.
●
Front cover. See
Front cover on page 42.
Remove the left cover
1. Use the figure below to locate the tabs (callout 1) on the cover.
Figure 2-10 Remove the left cover (1 of 5)
1
ENWW Covers 43
To Next Page
Loading...