EN
Error Codes –
35
1
All Printers
• There is too much data or the data is too complex.
– Simplify the print job or add memory.
6L, 5L, 6P, 5P
• Use the remote control panel to turn Page Protect to Auto or On.
5Si
• There is too much data or the data is too complex.
– Enable Page Protect from the control panel and from the
software. (This may require additional memory.)
LJ 5
• There is too much data or the data is too complex.
– Turn Image Adapt and Page Protect to On or Auto. (This can be
set within the remote control panel.) Press
[Go]
to resume
printing.
4L
• There is too much data or the data is too complex.
– Reduce the complexity of the print job.
• The print job is too complex.
– Turn Image Adapt and Page Protect to On or Auto. (This can be
set within the HP Explorer remote control panel.)
• There is not enough memory.
– Add the optional memory module.
4M Plus, 4 Plus, 4M, 4
• There is too much data or the data is too complex.
– Enable Page Protect from the control panel and from the
software. (This may require additional memory.)
21 Error/Print Overrun
To Next Page
Loading...
Need help?
General
