38 – Control panel messages
EN
All Printers
• An unexpected PostScript firmware error has occurred.
– Replace the PostScript SIMM.
All Printers
• A PCL file is being sent to the printer while it is in PostScript mode,
or a PostScript file or application error has occurred.
– Check the configuration, application, and print files.
5 Si
• The optional disk failed a self-test.
– Press [Select] to continue.
All Printers
• The computer and printer may be set to different baud rates.
– Refer to the service manual to reset the baud rates.
• The computer is turned off.
– Turn the computer on.
• The MIO card is unseated or defective.
– Remove, reseat, or replace the MIO card.
• An abnormal connection break occurred while transferring data from
the computer.
– Press [Continue] or [Go] on the printer to clear the error
message.
30 PS Error 22 or 25
30 PS Error XX (all others)
30.1.1 Disk Failure
40 Error (data transfer error)
To Next Page
Loading...
Need help?
General
