EN
Error Codes –
41
1
All Printers
• The DC controller or formatter PCA is defective.
IIISi/4Si
• The tab on the toner cartridge is broken.
5Si, 5
• If x=1: Defective connections:
– Reseat J205, J206, J207, and the laser scanner connections.
• If x=2: Beam detect malfunction:
– Reseat the connectors, including the laser scanning assembly.
• If x=3: Paper size selection does not match installed paper or paper
multifeed:
– Check for paper jams, multifeeds, or misfeeds.
Insert paper that is the correct size.
One of the cassettes is overfull or improperly adjusted.
• If x=4: Sync error:
– Reseat the DC controller and the formatter PCA connections.
• If x=5: Video sync or undetermined error:
– Reseat the DC controller and the formatter PCA connections.
41.4 or 5 Error
41.x Error
To Next Page
Loading...
Need help?
General
