40 – Control panel messages
EN
IIIP, IIP Plus, IIID, III, IID, II
• The fiber optic cable is bent or broken.
IIP
• For service notes between 2925J00000 and 3047J99999:
– Replace the fusing assembly.
IIID, III, IID, II
• There is a bad laser scanner or a bad laser scanner cable.
– Replace the cable assembly from the DC controller to the laser
scanner.
2686D/A
• The laser power is misadjusted.
– Refer to the service manual to adjust the laser power.
All Printers
• There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections.
• There is a paper multifeed or the wrong size of paper is being used.
– See service notes C2001A-01 and -02 (for LJ4 and 4+).
• The paper size selection does not match the installed paper.
• One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette.
• The paper does not meet HP specifications.
41.1 or 2 Error, 41.3 Error